Veneer packages of 12 sheets each, graded as the basis for all join types and for pattern matching. Packages with a pattern structure of up to 30 m possible.
All veneers are crown grade. Either natural or spliced crown cuts are possible.
Usually a spliced crown cut, obtained by splicing almost straight-grained veneers
All veneers are straight-grained
or rift grade
For all large premises, we recommend a personal visit to europlac, to allow us to assist you in choosing the right veneers. We'll do our very best to help you find the optimal solution, whatever the nature of your requirements!
The options are numerous. We would be happy to advise you on the
optimal join type for your application
Our veneers are normally "book matched", in other words there a "right" side and a "left" side, which is always alternate like the pages of a book and create a symmetrical pattern.
Veneers can also be "slip matched", in other words the same side is always "on top", creating a uniform pattern that is pleasing to the eye when the panels are stained. Rift veneers or veneers with an attractive, natural crown cut are suitable for slip matching.
Veneers from at least six different bundles are matched in a random sequence. This produces a wood plank effect similar to that of glued solid wood. Some types of wood are also treated with sap to emphasise the natural look. Random matched 8-15 cm, 8-10 Pac. 2/3 crown cut, 1/3 str. light figured.
Random matched 8-15 cm, 8-10 Pac., str. light figured.
Random matched 8-15 cm, 8-10 Pac. 2/3 str. light figured, 1/3 crown cut.
The veneer sheets are manually laid on the core board leaving an open groove. The coloured base panel surface is visible through the grooves.
Noblewood sheets of narrow lamellae with a width of approx. 25 mm are joined together to form a noblewood deck.
The veneer is applied to a coloured substrate. The CURVE joints are created by milling and the coloured substrate becomes visible.
Exclusive high-quality join methods such as “Herringbone”, “Mosaic”, “Diagonal” and Chevron. For end grain wood, circular and square cuts are possible.
